3x12 glazed polished porcelain subway tile

Glazed porcelain tiles are the most commonly used type of porcelain tile. Glazing is a process in which a coating or glaze is applied to ceramic ware, usually consisting of vitrified lead glass and sometimes colored oxides that produce an opaque surface. It can either be clear, translucent, glossy or matte depending on how much of the marble is covered by glaze. They can be installed on walls, floors or any other flat surface without worry about them cracking like ceramic tile because they have an extremely high resistance to breaking.

The Advantage of Full Polished Glazed Porcelain Tile

1. Good appearance: Full polished glazed tiles adopt polishing technology, and printed antique and beautiful patterns on the surface of the tiles, making the appearance look beautiful and atmospheric. At the same time, it also brings good visual effects to people, good decorative effect, and improves the grade of the living room.

2. Good gloss: Full polished glazed tiles are fired at high temperature, which is the same as polished tiles. During the production process, the crystal wear-resistant glaze on the surface of the tile is used to seal the molecules inside the tile, so that the inside and outside of the tile are completely isolated. This process can keep the surface of the bricks glossy for a long time, and it will not fade under time use.

3.Good water absorption and air permeability: fully polished glazed tiles have very good water absorption and air permeability. If water is sprinkled on the tiles, the tiles can quickly absorb the water and make them dry in a short time.

Cleaning Tips

1. Do more cleaning at ordinary times

Since the anti-fouling ability of fully polished glazed tiles is not very strong, it can be seen immediately if there is a little dust and stains. Therefore, it should be cleaned regularly, and the cleaning frequency can be calculated according to the degree of pollution of the tiles.

2. Use a less wet mop to clean tiles

When cleaning fully glazed tiles, try to use a wet mop as little as possible, and use a dry mop more for cleaning. If there are stains on the part that are not clean, you can use a special cleaner for tiles to deal with it.

3. Regularly apply antifouling wax to the tiles

Every three to four months, you can apply antifouling wax to the tiles, which is equivalent to adding a protective layer to the surface of fully glazed tiles.

4. Use toothpaste for scratches

If there are scratches or scratches on the fully polished glaze layer, first rub a little toothpaste on the scratches, and then wipe it with a soft cloth, and the small scratches can be wiped off.